Linear and Ring Arrays
Lightspeed Technologies offers a range of linear and ring illuminators for different applications such as:
Objective Ring Illuminators
-
High Speed Imaging of Micro Sized Objects such as microjets, boiling, or cells.
-
The illuminator ring does not include the HPLS driver, but is configured and tested for high current, short pulse operations.
HPLS-76R-850
HPLS-76R-White
HPLS-76R-Window
850nm LED Ring Light Source for 34mm Mitutoyo 5X and 10X Objective Lenses M Plan APO for use with HPLS high intensity / short flash drivers
White LED Ring Light Source for 34mm Mitutoyo 5X and 10X Objective Lenses M Plan APO for use with HPLS high intensity / short flash drivers
Quartz Window for HPLS-76R Illuminators
Large Area Illuminators
-
Wind Tunnel Testing with Schlierin Imaging and Pressure Sensitive Paint
-
Capture High Speed Events of Large Objects
-
Custom Layout and Emitter Configurations Available.
-
18 Emitters with center aperture for camera. Can be configured with UV, Visible, or IR LEDS. We can adjust the layout and can scale to much larger formats.
HPLS-692 Installed on Camera
HPLS-692-AD3500-18
HPLS-692-18-COL-25X0.1NA
HPLS-692-18-COL-25X0.5NA
HPLS-692-18-(8+8)DEG
LEDH-692-18
HPLS 692 configured with 18 LEDs around center aperture, AD3500 drivers.
Set of 18 collimators with 0.1 NA for narrow beam configuration
Set of 18 collimators with 0.5 NA for wide beam configuration (bigger spot, higher efficiency)
18 sets of two 8 degree wedges for beam steering collimator output
Set of 18 replacement LEDs (visible wavelength range, select color from data sheet). Contact us for UV and NIR options
HPLS-692
Linear Arrays
-
Linear array for illuminating jet sprays or other high speed events over 12 inches.
OH36-LGME
OH36-LGME2
Single Color Line Generator with multiple LED Emitters utilizes HPLS-36 driver
Second Color Option
Driver for LGME:
HPLS-36DD18B
Short pulses with maximum current Fastest rise time, highest intensity. Base unit with built-in 18A driver for applications where fastest fall/rise time, short pulses at low duty cycle are required. Light is triggered by external signal, TTL/CMOS 3-5V, BNC connector. Optical pulse halfwidth matching the halfwidth of starting pulse. Smart Time Limiting circuitry limits cumulative energy delivered to LED. Single pulse length range 20ns to <2us depending on LED.
