Some of the smallest micropositioners available anywhere
Based on very small dovetail slides
Very smooth backlash-free motion
Wide range of configurations
Specifications
Three axis XYZ micropositioner
Travel
3mm
Sensitivity
<0.5µm
Adjusters
0.25 pitch with 1.27mm hex socket
Ball hex. driver supplied
Options and Accessories
Knurled knob adjuster (Knurled knob sold separately, part number MD-054115)
Post mounting using MDE857 (and MDE858 if required)
Fibre holders available, MDE719 and MDE730
Non-magnetic versions available
Vacuum compatible versions available
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws
will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are
unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.
