|
| Part No. |
MDE266 |
| |
Contact Us for current pricing and lead times. |
edrawing
.pdf drawing 1
.pdf drawing 2 |
- Some of the smallest micropositioners available anywhere
- Based on very small dovetail slides
- Very smooth backlash-free motion
- Wide range of configurations
|
 |
|
|
Specifications |
| Dual axis XY micropositioner |
| |
|
| Travel |
3mm |
| Sensitivity |
<0.5µm |
| Adjusters |
0.25 pitch with 1.27mm hex socket
Ball hex. driver supplied |
| Top plate |
12mm x 12mm, moves 3mm |
| Thickness |
11mm (MDE266) |
| Mounting holes |
Four M1.6 x 2mm deep, both sides |
Options and Accessories
Knurled knob adjuster (Knurled knob sold separately, part number MD-054115)
Post mounting using MDE857 (and MDE858 if required)
Fibre holders available, MDE719 and MDE730
Non-magnetic versions available
Vacuum compatible versions available
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.
|
 |
|
