mde261xz

Service and Solutions at the Speed of Light

MDE261-XZ Dual Axis XZ Micropositioner

No Picture Available

Part No.	MDE261-XZ
	Pricing

Ultra small dovetail slides
Very smooth backlash-free motion
Wide range of configurations

Specifications
Dual axis XZ micropositioner comprising 2off MDE261 and bracket
Travel	5mm
Sensitivity	<0.5µm
Adjusters	0.25 pitch adjusters with knurled knob and 2.5mm hex socket for remote adjustment with hex key
Top plate	26mm x 20mm, moves 5mm
Mounting holes	Four M2 x 2mm deep

Options and Accessories

Post mounting using MDE857 (and MDE858 if required)

Tilting option using MDE270 and MDE273

Rotation option (use MDE283)

Table-mounting option (use MDE293)

Fibre holder available (MDE723)

Lockable travel option

Non-magnetic versions available

Vacuum compatible versions available

Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area.

Lightspeed Technologies (408)761-0062