|
| Part No. |
MDE261 |
| |
Contact Us for current pricing and lead times. |
edrawing
edrawing - locking version
.pdf drawing |
- Ultra small dovetail slides
- Very smooth backlash-free motion
- Wide range of configurations
|
 |
|
|
Specifications |
| Single axis micropositioner |
| Travel |
5mm |
| Sensitivity |
<0.5µm |
| Adjuster |
0.25 pitch adjuster with knurled knob and 2.5mm hex socket for remote adjustment with hex key |
| Top plate |
26mm x 20mm, moves 5mm |
| Mounting holes |
Four M2 x 2mm deep |
| Thickness |
8mm |
Options and Accessories
Post mounting using MDE857 (and MDE858 if required)
Tilting option using MDE270 and MDE273
Rotation option (use MDE283)
Table-mounting option (use MDE293)
Fibre holder available ( MDE723 )
Lockable travel option
Non-magnetic versions available
Vacuum compatible versions available
Note: Surface mating with these micropositioners must be truly flat. Unflat surfaces or overtightened screws will cause the slide motion to be jerky and stiff due to distortion. Dovetail slides, unlike miniature ball slides, are unlikely to be permanently damaged by temporary distortion, as the load is supported on a comparatively large area. |
