• Piezo Driven Step Motor with Low Hysteresis
• Holds Reached Position without Current
• Free Opening of 10mm (on Whole Travel)
• Fits to Optical Bench Systems (LINOS, OWIS, etc.
• XY or XYZ Combinations
• Travels up to 8mm
• Precision Ball Bearing Guides
• Step Width about 15nm
• Positioning Accuracy Better than 50nm
• Velocity Up to 1.5mm/s
• CNC-Machined Aluminum Body
• No Limit Switches Necessary
• Vacuum Preparation Option
• Customized Designs Possible
• Driven by Handheld CN.030.0001 or USB Controller CU.030.xx0x

                     Travel:   8mm

                     Free Opening:    10mm

                     Max. Speed:    1.5mm/s (depending on controller)

                     Mass:    32g

                     Load Characteristics

                       Max. load

                       Mx, My, Mz:    0.4 Nm

                       Fx (blocking force:    4.5 (5) N

                       Fy, Fz:    20 N

                     Resolution (calculated)

                       Single Step:     ~200nm

                       1/16th Step:    ~15nm (w/controller CU 30)

                       Half Step:         ~100nm

                       Double Step:    ~400nm (w/controller CN 30)

                     Guidance Accuracy (without load)

                       For 8mm Travel:                

                       Yaw Angle:    <20 arc sec

                       Pitch Angle:    <60 arc sec

                       Vertical Deviation:    <1 um

                       Lateral Deviation:    <2 um

Base Unit Diameter 1.450"