• Piezo Driven Step Motor with Low Hysteresis
• Holds Reached Position without Current
• XY or XYZ Combinations
• 3.5mm Travel
• Precision Ball Bearing Guides
• Step Width about 15nm
• Positioning Accuracy Better than 50nm
• Velocity Up to 1.5mm/s
• CNC-Machined Aluminum Body
• No Limit Switches Necessary
• Vacuum Preparation Option
• Customized Designs Possible
• Driven by Handheld CN.030.0001 or USB Controller CU.030.xx0x
• Connection Cable CK.030.1003 Recommended
 

          Technical Data :

          Travel:   3.5mm

          Max. Speed:    1.5mm/s (depending on controller)

          Mass:    6g

          Load Characteristics

              Max. load

              Mx, My, Mz:    0.4 Nm

              Fx (blocking force:    4.5 (5) N

              Fy, Fz:    20 N

          Resolution (calculated)

              Single Step:     ~300nm

              1/16th Step:    ~20nm (w/controller CU 30)

              Half Step:         ~150nm

              Double Step:    ~600nm (w/controller CN 30)

          Guidance Accuracy (without load)

              Yaw Angle:    <20 arc sec

              Pitch Angle:    <60 arc sec

              Vertical Deviation:    <1 um

              Lateral Deviation:    <2 um

.

Base Unit Diameter 1.450"