• Piezo Driven Step Motor with Low Hysteresis
• Holds Reached Position without Current
• For Use at ultra Low Temperatures Up to 4K
• XY or XYZ Combinations (L-Bracket ML.017.9001 for XYZ Needed)
• Travels up to 5mm
• Precision Linear Bearings
• Step Width about 200nm
• Positioning Accuracy Better than 1um
• Velocity Up to 1.0mm/s
• CNC-Machined Steel Body
• No Limit Switches Necessary
• Vacuum Preparation Option
• Customized Designs Possible
• Driven by USB Controller CU.017.0003

                     Travel:   5mm

                     Free Opening:    10mm

                     Max. Speed:    1.0mm/s (w/controller CU 17 LT)

                     Electrical Connection:    2 Solder Points

                     Mass:    25g

                     Load Characteristics

                       Max. load

                       Mx:    3.0 Ncm

                       My, Mz:    1.5 Ncm

                       Fx (blocking force:    1.0 (1.5) N

                       Fy, Fz:    1.0 N

                     Resolution (calculated)

                       Single Step (w/controller CU 17 LT):    

                         w/22V (at 4.2K):    ~200nm

                         w/42V (at 4.2K):    ~500nm

                         w/82V (at 4.2K):    ~1um

                     Guidance Accuracy (without load)

                       For 5mm Travel:                

                         Vertical Deviation:    <2 um

                         Lateral Deviation:    <2 um

Base Unit Diameter 1.450"