Elliot Gold™ series polarisation maintaining (PM) fiber launch system comprising: 3-axis simple manual flexure stage with standard fiber rotator, objective lens mount with RMS thread, and small fixed bracket. Suitable for launching free space light beams into PM fiber. PM fiber requires that the roll axis be adjusted to ensure correct alignment of the laser polarization and fiber polarization axes.

All accessories are compatible with the Elliot Gold™ series flexure stages. The optical axis height is 18 mm above the platform surface and on the center line of the location slot. Where necessary a locating tongue forms part of the accessory. A standard clamp system is used and is supplied with the flexure stages and accessory platforms. The clamp set (MDE154) is available separately if required.

System Constituents:
MDE718 Fiber Rotator
MDE330 Elliot Gold™ Series XYZ High Precision Flexure Stage
MDE217 Manual Adjusters 0.25 Pitch (x3)
MDE154 Clamp Set
MDE150 Objective Mount with RMS Thread (Objective Lens Not Included)
MDE148 Small Fixed Bracket

Contact Us for current pricing and lead times.

Specifications:

Configuration:	Right Handed Version
Fiber Holder:	V-Groove & Single Clamp Arm for 125µm Fiber. Spring-Loaded Clamp Arm Force Adjusts from 25 to 125 g
Fiber Rotation:	Full 360° Rotation. Resolution Approx. 0.1 Degrees
Adjuster Type:	3 Simple Manual Adjusters, 0.25 Pitch (Model MDE217)
Stage Travel:	2 mm in X, Y, and Z Axes
Resolution:	200 nm
Load Capacity:	4.5 kg
Arcuate Displacement:	X Axis 20um (at Max. Range of Travel) Y and Z Axes 14um (at Max. Range of Travel)
Optical Axis:	The optical height of all Flexure Stage accessories is 18mm above the top plate.  Therefore,the optical axis height of a mounted accessory is 94mm above the bottom of the stage.
Objective Mount :	Removable Stainless Steel Sleeve with RMS Thread (0.800"-36). Allows On-Axis Adjustment and Exchange of Objectives or Suitably Mounted Aspheric or Ball Lenses

Options and Accessories: